cisco — Example: Configuring Layer 2 VNI with Spine Multicast Replication

Leaf-02# Return to Verifying the Layer 2 VNI with Back-to-Back Multicast Replication, on page 17 . Example: Configuring Layer 2 VNI with Spine Multicast Replication This example shows how to configure and verify a Layer 2 VNI with spine multicast replication using the following topology: Figure 4: EVPN VXLAN Network with a Layer 2 VNI with Multicast Replication The topology shows an EVPN VXLAN network with two spine switches (Spine Switch 1 and Spine Switch 2) and two VTEPs (VTEP 1 and VTEP 2). Multicast replication is performed between the VTEPs to forward BUM traffic in the network.

Spine Switch 1 and Spine Switch 2 act as route reflectors and also as the RPs for the multicast BUM traffic in the network. The following tables provide sample configurations for the devices in this topology: Configuring EVPN VXLAN Layer 2 Overlay Network Example: Configuring Layer 2 VNI with Spine Multicast Replication Configuring EVPN VXLAN Layer 2 Overlay Network 29