cisco — Example: Configuring Layer 2 VNI with Spine Ingress Replication

Pkts: 0/0/0 Rate: 0 pps (*,225.0.0.101) Flags: C HW SW Forwarding: 2/0/150/0, Other: 0/0/0 HW Forwarding: 0/0/0/0, Other: 0/0/0 Tunnel1 Flags: A GigabitEthernet1/0/3 Flags: F NS Pkts: 0/0/2 Rate: 0 pps GigabitEthernet1/0/2 Flags: F NS Pkts: 0/0/2 Rate: 0 pps (172.16.254.3,225.0.0.101) Flags: HW SW Forwarding: 0/0/0/0, Other: 0/0/0 HW Forwarding: 0/0/0/0, Other: 0/0/0 GigabitEthernet1/0/2 Flags: A GigabitEthernet1/0/3 Flags: F NS Pkts: 0/0/0 Rate: 0 pps (172.16.254.4,225.0.0.101) Flags: HW SW Forwarding: 0/0/0/0, Other: 0/0/0 HW Forwarding: 0/0/0/0, Other: 0/0/0 GigabitEthernet1/0/3 Flags: A GigabitEthernet1/0/2 Flags: F NS Pkts: 0/0/0 Rate:

0 pps Spine-02# Return to Verifying the Layer 2 VNI with Spine Multicast Replication, on page 33 . Example: Configuring Layer 2 VNI with Spine Ingress Replication This example shows how to configure and verify a Layer 2 VNI with spine ingress replication using the following topology: Figure 5: EVPN VXLAN Network with a Layer 2 VNI with Ingress Replication Configuring EVPN VXLAN Layer 2 Overlay Network Example: Configuring Layer 2 VNI with Spine Ingress Replication Configuring EVPN VXLAN Layer 2 Overlay Network 47