Flood List Information : Olist: 1125, Ports: 2 Port Information : BD_PORT Gi1/0/10:101 VXLAN_REP PL:2(1) T:VXLAN_REP [IR]10101:172.16.254.3 Unicast Address table information : 44d3.ca28.6cc1 VXLAN_UC PL:1(1) T:VXLAN_UC [MAC]10101:172.16.254.3 IP Multicast Prefix table information : Source: *, Group: 224.0.0.0/24, IIF: Null, Adjacency: Olist: 1125, Ports: 2 Source: *, Group: 224.0.1.39, IIF: Null, Adjacency: Olist: 1125, Ports: 2 Source: *, Group: 224.0.1.40, IIF: Null, Adjacency: Olist: 1125, Ports: 2 Leaf-02# Return to Verifying the Layer 2 VNI with Spine Ingress Replication, on page 51 .
Outputs to Verify the Configuration on Spine Switch 1 The following example shows the output for the show ip route command on Spine Switch 1: Spine-01# show ip route Codes:
L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, m - OMP n - NAT, Ni - NAT inside, No - NAT outside, Nd - NAT DIA i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route H - NHRP, G - NHRP registered, g - NHRP registration summary o - ODR, P - periodic downloaded static route, l - LISP a - application route + - replicated route, % - next hop override, p - overrides from PfR Gateway of last resort is not set 172.16.0.0/16 is variably subnetted, 12 subnets, 2 masks C 172.16.13.0/24 is directly connected, GigabitEthernet1/0/2 L 172.16.13.1/32 is directly connected, GigabitEthernet1/0/2 C 172.16.14.0/24 is directly connected, GigabitEthernet1/0/3 L 172.16.14.1/32 is directly connected, GigabitEthernet1/0/3 O 172.16.23.0/24 [110/2] via 172.16.13.3, 01:29:42, GigabitEthernet1/0/2 O 172.16.24.0/24 [110/2] via 172.16.14.4, 01:29:46, GigabitEthernet1/0/3 O 172.16.254.3/32 [110/2] via 172.16.13.3, 01:29:42, GigabitEthernet1/0/2 O 172.16.254.4/32 [110/2] via 172.16.14.4, 01:29:46, GigabitEthernet1/0/3 C 172.16.255.1/32 is directly connected, Loopback0 O 172.16.255.2/32 [110/3] via 172.16.14.4, 01:29:46, GigabitEthernet1/0/3 [110/3] via 172.16.13.3, 01:29:42, GigabitEthernet1/0/2 O 172.16.255.3/32 [110/2] via 172.16.13.3, 01:29:42, GigabitEthernet1/0/2 O 172.16.255.4/32 [110/2] via 172.16.14.4, 01:29:46, GigabitEthernet1/0/3 Spine-01# Configuring EVPN VXLAN Layer 2 Overlay Network Example:
Configuring Layer 2 VNI with Spine Ingress Replication Configuring EVPN VXLAN Layer 2 Overlay Network 56