The topology shows an EVPN VXLAN network with 2 VTEPs (VTEP 1 and VTEP 2) connected to perform bridging. Configuring BUM Traffic Rate Limiting on a VTEP The following example provides a sample configuration for BUM traffic rate limiting on VTEP 1:
Leaf-01# configure terminal Leaf-01(config)# class-map match-all CL2Miss Leaf-01(config-cmap)# match l2 dst-mac miss Leaf-01(config-cmap)# exit Leaf-01(config)# policy-map PL2Miss Leaf-01(config-pmap)# class CL2Miss Leaf-01(config-pmap-c)# police 100000 Leaf-01(config-pmap-c)# exit Leaf-01(config)# interface nve1 Leaf-01(config-if)# service-policy output PL2Miss Leaf-01(config-if)# exit Leaf-01(config)# end Leaf-01# Verifying BUM Traffic Rate Limiting on a VTEP The following example shows how to check the aggregated policy map and rate statistics on VTEP 1: Leaf-01# show policy-map int nve1 nve1 Service-policy output: PL2Miss Class-map: sam1 (match-all) 0 packets Match:
l2 dst-mac miss police: cir 100000 bps, bc 3125 bytes conformed 221238 bytes; actions: transmit exceeded 2647233234 bytes; actions: drop conformed 7000 bps, exceeded 69060000 bps Class-map: class-default (match-any) 10022668 packets Match: any Leaf-01# The following example shows how to validate the member VNI policy under an NVE on VTEP 1: Configuring EVPN VXLAN Layer 2 Overlay Network Example: Configuring BUM Traffic Rate Limiting Configuring EVPN VXLAN Layer 2 Overlay Network 60