Creating a Flow Sampler Perform this required task to configure and enable a flow sampler. Procedure Configuring Flexible NetFlow Creating a Flow Sampler Command or Action Purpose Step 11 end Example: Device(config-flow-monitor)# end Exits Flexible NetFlow flow monitor configuration mode and returns to privileged EXEC mode. Step 12 show flow monitor [[name] monitor-name [cache [format {csv | record | table} ]] [statistics]] Example: Device# show flow monitor FLOW-MONITOR-2 cache (Optional) Displays the status and statistics for a Flexible NetFlow flow monitor. Step 13 show running-config flow monitor monitor-name Example:
Device# show running-config flow monitor FLOW MONITOR-1 _ (Optional) Displays the configuration of the specified flow monitor. Step 14 copy running-config startup-config Example: Device# copy running-config startup-config (Optional) Saves your entries in the configuration file. Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. • Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 sampler sampler-name Example: Creates a sampler and enters sampler configuration mode. Configuring Flexible NetFlow 27