Device(config-if)# ip flow monitor mm_1 output Device(config-if)# end Feature History for Flexible NetFlow This table provides release and related information for the features explained in this module. These features are available in all the releases subsequent to the one they were introduced in, unless notedotherwise. Use the Cisco Feature Navigator to find information about platform and software image support. To access Cisco Feature Navigator, go to https://cfnng.cisco.com/ .
Configuring Flexible NetFlow Feature History for Flexible NetFlow Release Feature Feature Information Cisco IOS XE Everest 16.5.1a Flexible NetFlow Flexible NetFlow uses flows to provide statistics for accounting, network monitoring, and network planning. Cisco IOS XE Gibraltar 16.12.1 Source Group Tag (SGT), Destination Group Tag (DGT) over Flexible NetFlow for IPv6 traffic Support was introduced for Source Group Tag (SGT), Destination Group Tag (DGT) fields over Flexible NetFlow, for IPv6 traffic.
Cisco IOS XE Amsterdam 17.1.1 Ingress and Egress Flexible Netflow on MPLS Allows capture of IP flow information for packets undergoing Multiprotocol Label Switching (MPLS) label imposition when entering an MPLS network. These packets arrive on a device as IP packets and are transmitted as MPLS packets. Cisco IOS XE Amsterdam 17.2.1 VPN ID in NetFlow Supports Virtual Private Network Identifier (VPN-ID) configuration in Flexible NetFlow. A VPN-ID is global and unique. It is used to identify a VPN across autonomous systems (ASes).
Cisco IOS XE Bengaluru 17.5.1 Flexible NetFlow for Egress VRF support Support was introduced for configuring Flexible NetFlow for Egress VRF support.\ Configuring Flexible NetFlow 36