access-group GUEST_ACL ! policy-map type control subscriber CONSENT event session-started match-all 10 authenticate using webauth parameter-map CONSENT event authentication-success match-all 10 class always do-until-failure 10 class always do-until-failure 10 activate service-template GUEST_POLICY Named Parameter Map for Web Authentication with Consent The following example shows the configuration of a named parameter map for web authentication with consent, along with the corresponding control policy that uses the parameter map: parameter-map type webauth WEBAUTH_CONSENT type webconsent !
ip access-list extended GUEST_ACL permit ip any 172.30.30.0 0.0.0.255 permit ip any host 172.20.249.252 ! service-template GUEST_POLICY access-group GUEST_ACL ! policy-map type control subscriber WEBAUTH_CONSENT event session-started match-all 10 authenticate using webauth parameter-map CONSENT event authentication-success match-all 10 class always do-until-failure 10 class always do-until-failure 10 activate service-template GUEST_POLICY Feature History for Identity Control Policies This table provides release and related information for the features explained in this module.
These features are available in all the releases subsequent to the one they were introduced in, unless noted otherwise. Table 1: Feature History for Identity Control Policies Use the Cisco Feature Navigator to find information about platform and software image support. To access Cisco Feature Navigator, go to https://cfnng.cisco.com . Configuring Identity Control Policies Feature History for Identity Control Policies Release Feature Name Feature Information Cisco IOS XE Everest 16.5.1a Cisco Common Classification Policy Language-Based Identity Configuration Identity control policies define the actions taken in response to specified events and conditions.
Configuring Identity Control Policies 21