cisco Identity Based Networking Services (IBNS) — Configuring a Control Policy

Configuring Identity Control Policies Configuring a Control Policy Command or Action Purpose Device> enable Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 policy-map type control subscriber control-policy-name Example: Device(config)# policy-map type control subscriber POLICY 1 _ Defines a control policy for subscriber sessions. Step 4 event event-name [match-all | match-first] Example: Device(config-event-control-policymap)# event session-started Specifies the type of event that triggers actions in a control policy if conditions are met. • match-all is the default behavior.

• To display the available event types, use the question mark (?) online help function. For a complete description of event types, see the event command. Step 5 priority-number class {control-class-name | always} [do-all | do-until-failure | do-until-success] Example: Device(config-class-control-policymap)# 10 class always Associates a control class with one or more actions in a control policy. • A named control class must first be configured before specifying it with the control-class-name argument. • do-until-failure is the default behavior.

Step 6 action-number activate {policy type control subscriber control-policy-name [child [no-propagation | concurrent] | service-template template-name [aaa-list list-name] [precedence number] [replace-all]} Example: Device(config-action-control-policymap)# 10 activate service-template FALLBACK (Optional) Activates a control policy or service template on a subscriber session. Step 7 action-number authenticate using {dot1x | mab | webauth} [aaa {authc-list authc-list-name | authz-list authz-list-name]} [merge] [parameter-map map-name] [priority priority-number] [replace | replace-all] [retries number {retry-time seconds}] Example:

(Optional) Initiates the authentication of a subscriber session using the specified method. Configuring Identity Control Policies 9