Device(config)# ip msdp peer switch.cisco.com connect-source gigabitethernet1/0/1 Device(config)# ip msdp sa-filter out switch.cisco.com list 100 Device(config)# access-list 100 permit ip 171.69.0.0 0.0.255.255 224.20 0 0.0.255.255 Controlling Source Information that Your Switch Receives: Example This example shows how to filter all SA messages from the peer named switch.cisco.com : Device(config)# ip msdp peer switch.cisco.com connect-source gigabitethernet1/0/1 Device(config)# ip msdp sa-filter in switch.cisco.com Feature History for Multicast Source Discovery Protocol This table provides release and related information for the features explained in this module.
These features are available in all the releases subsequent to the one they were introduced in, unless noted otherwise. Use the Cisco Feature Navigator to find information about platform and software image support. To access Cisco Feature Navigator, go to https://cfnng.cisco.com/ . Configuring MSDP Controlling Source Information that Your Switch Receives: Example Release Feature Feature Information Cisco IOS XE Everest 16.5.1a MSDP MSDP allows multicast sources for a group to be known to all rendezvous points (RPs) in different domains. Configuring MSDP 26