cisco — Configuring VRF-Aware Services

Configuring VRF-Aware Services These services are VRF-Aware: • ARP • Ping • Simple Network Management Protocol (SNMP) Configuring Multi-VRF CE Configuring VRF-Aware Services Command or Action Purpose Step 5 network network-number area area-id Example: Device(config-router)#network 5 area 2 Defines a network address and mask on which OSPF runs and the area ID for that network address. Step 6 address-family ipv4 vrf vrf-name Example: Device(config-router)#address-family ipv4 vrf vpn1 Defines BGP parameters for PE to CE routing sessions, and enter VRF address-family mode. Step 7 neighbor address remote-as as-number Example:

Device(config-router)#neighbor 10.1.1.2 remote-as 2 Defines a BGP session between PE and CE routers. Step 8 neighbor address activate Example: Device(config-router)#neighbor 10.2.1.1 activate Activates the advertisement of the IPv4 address family. Step 9 end Example: Device(config-router)#end Returns to privileged EXEC mode. Step 10 show ip bgp [ipv4] [neighbors] Example: Device#show ip bgp ipv4 neighbors Verifies BGP configuration. Step 11 copy running-config startup-config Example: Device#copy running-config startup-config (Optional) Saves your entries in the configuration file. Configuring Multi-VRF CE 11