Configuring VRF-Aware Services for NTP Configuring VRF-aware services for NTP comprises configuring the NTP servers and the NTP client interfaces connected to the NTP servers. Before you begin Ensure connectivity between the NTP client and servers. Configure a valid IP address and subnet on the client interfaces that are connected to the NTP servers. Configuring VRF-Aware Services for NTP on NTP Client Perform the following steps on the client interface that is connected to the NTP server. Procedure Configuring Multi-VRF CE Configuring VRF-Aware Services for NTP Command or Action Purpose Step 7 snmp-server user user group remote host vrf vpn-instance security model Example:
Device(config)#snmp-server user abcd remote 172.16.20.3 vrf vpn1 priv v2c 3des secure3des Adds a user to an SNMP group for a remote host on a VRF for SNMP access. Step 8 end Example: Device(config-if)#end Returns to privileged EXEC mode. Command or Action Purpose Step 1 enable Example: Device>enable Enables privileged EXEC mode. Enter your password, if prompted. Step 2 configure terminal Example: Device#configure terminal Enters global configuration mode. Step 3 interface interface-id Example: Device(config)#interface gigabitethernet 1/0/1 Specifies the Layer 3 interface to be associated with the VRF, and enters the interface configuration mode. Configuring Multi-VRF CE 13