cisco — Configuration Example: Multi-VRF CE

Monitoring VRF-Aware Services for ARP Procedure Monitoring VRF-Aware Services for Ping Procedure Monitoring Multi-VRF CE This section provides information on commands for monitoring multi-VRF CE: Table 2: Commands for Displaying Multi-VRF CE Information Purpose Command Displays routing protocol information assoc a VRF. show ip protocols vrf vrf-name Displays IP routing table information assoc a VRF. show ip route vrf vrf-name [ connected ] [ protocol [ as-number ]] [ list ] [ mobile ] [ odr ] [ profile ] [ static ] [ summary ] [ supernets-only ] Displays information about the defined VRF show ip vrf [ brief | detail | interfaces ] [ vrf-name ] Configuration Example:

Multi-VRF CE OSPF is the protocol used in VPN1, VPN2, and the global network. BGP is used in the CE to PE connections. The examples following the illustration show how to configure a switch as CE Switch A, and the VRF configuration for customer switches D and F. Commands for configuring CE Switch C and the other customer switches are not included but would be similar. Configuring Multi-VRF CE Monitoring VRF-Aware Services for ARP Command or Action Purpose Step 1 show ip arp vrf vrf-name Example: Device#show ip arp vrf vpn1 Displays the ARP table in the specified VRF. Command or Action Purpose Step 1 ping vrfvrf-nameip-host Example:

Device#ping vrf vpn1 ip-host Displays the ARP table in the specified VRF. Configuring Multi-VRF CE 20