Configuring RADIUS Configuring RADIUS Login Authentication Command or Action Purpose this authentication method, you must configure the RADIUS server. • line: Use the line password for authentication. Before you can use this authentication method, you must define a line password. Use the password password line configuration command. • local: Use the local username database for authentication. You must enter username information in the database. Use the username name password global configuration command. • local-case: Use a case-sensitive local username database for authentication.
You must enter username information in the database by using the username password global configuration command. • none: Do not use any authentication for login. Step 5 line [console | tty | vty] line-number [ending-line-number] Example: Device(config)# line 1 4 Enters line configuration mode, and configure the lines to which you want to apply the authentication list. Step 6 login authentication {default | list-name} Example: Device(config-line)# login authentication default Applies the authentication list to a line or set of lines. • If you specify default, use the default list created with the aaa authentication login command.
• For list-name, specify the list created with the aaa authentication login command. Step 7 end Example: Device(config-line)# end Exits line configuration mode and enters privileged EXEC mode. Configuring RADIUS 28