cisco — Configuring RADIUS Source-Interface Under a RADIUS Server-Group

Configuring RADIUS Configuring RADIUS Source-Interface Under a RADIUS Server-Group Command or Action Purpose Step 3 {ip | ipv6} radius source-interface interface-number vrf vrf-name Example: Device(config)# ip radius source-interface GigabitEthernet1/0/23 vrf vrf17 Forces RADIUS to use the IP address of a specified interface for all outgoing RADIUS packets, and enables the specification on a per-VRF basis. • interface-name: Specifies the name of the interface that RADIUS uses for all of its outgoing packets. • vrf vrf-name: Specifies the per-VRF configuration. Step 4 aaa group server radius group name _ Example:

Device(config-sg-radius)# aa group server radius rad-grp Groups different RADIUS server hosts into distinct lists and distinct methods and enters server-group configuration mode. Step 5 server-private {ip-address | name} [nat] [single-connection] [port port-number] [timeout seconds] [key [0 | 7 | 6] string] Example: Device(config-sg-radius)# server-private 10.1.1.1 port 19 key cisco Configures the IP address of the private RADIUS server for the group server. Step 6 ip vrf forwarding vrf-name Example: Device(config-sg-radius)# ip vrf forwarding vrf17 (Optional) Configures the VRF reference of a AAA RADIUS server group. Step 7 { ip | ipv6 } radius source-interface interface-number Example:

Device(config-sg-radius)# ip radius source-interface loopback0 (Optional) Forces RADIUS to use the IP address of a specified interface for all outgoing RADIUS packets from the RADIUS group server. interface-name: Specifies the name of the interface that RADIUS uses for all of its outgoing packets. Step 8 end Example: Device(config-sg-radius)# end Returns to privileged EXEC mode. Configuring RADIUS 39