You can also apply the template through 802.1x authentication. During the 802.1x authentication process, you can dynamically assign different templates (and therefore different policies) to different interfaces. You can apply only one interface template to one port. Note Before you begin You have already created a custom policy. See Creating a Custom Device Tracking Policy with Custom Settings, on page 22 . Procedure Configuring Switch Integrated Security Features Using an Interface Template to Enable SISF Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password if prompted. Step 2 configure terminal Example:
Device# configure terminal Enters global configuration mode. Step 3 template interface template name _ Example: Device(config)# template interface template w sisf _ _ Creates a template with the name you specify and enters template configuration mode. In the accompanying example, a template called "template w sisf" is created. _ _ Step 4 device-tracking attach-policy policy name _ Example: Device (config-template)# device-tracking attach-policy sisf policy for template _ _ _ Attaches a policy to the template. SISF-based device-tracking is enabled and the policy is applied wherever the template is applied. Step 5 exit Example:
Device (config-template)# exit Exits the template configuration mode and enters the global configuration mode. Step 6 interface type number Example: Device(config)# interface gigabitethernet 1/1/4 Specifies an interface and enters interface configuration mode. Step 7 source template template name _ Example: Device(config-if)# source template template w sisf _ _ Configures a static binding for an interface template. In the accompaying example, "template w sisf" is statically applied to an _ _ interface. Configuring Switch Integrated Security Features 28