Verifying Web-Based Authentication Use the commands in this topic to display the web-based authentication settings for all interfaces or for specific ports. Table 2: Privileged EXEC show Commands Feature History for Web-Based Authentication This table provides release and related information for the features explained in this module. These features are available in all the releases subsequent to the one they were introduced in, unless noted otherwise. Use the Cisco Feature Navigator to find information about platform and software image support. To access Cisco Feature Navigator, go to https://cfnng.cisco.com .
Web-Based Authentication Verifying Web-Based Authentication Command or Action Purpose 192.168.4.5 Step 3 clear ip admission cache {* | host ip address} Example: # clear ip admission cache 192.168.4.5 Delete authentication proxy entries. Use an asterisk to delete all cache entries. Enter a specific IP address to delete the entry for a single host.
Command Purpose show authentication sessions method webauth Displays the web-based authentication settings for all interfaces for fastethernet, gigabitethernet, or tengigabitethernet show authentication sessions interface type slot/port[details] Displays the web-based authentication settings for the specified interface for fastethernet, gigabitethernet, or tengigabitethernet. In Session Aware Networking mode, use the show access-session interface command. Release Feature Feature Information Cisco IOS XE Everest 16.5.1a Web-Based Authentication The Web-Based Authentication feature authenticates end users on host systems that do not run the IEEE 802.1x supplicant. Web-Based Authentication 22