４ Preparation for Demo Screen Preparation procedure for safety CPU demonstration screens is shown in the flowchart below. It is necessary to register the safety CPU to monitor in 4-3 “Add Devices.” Make registration of an external device or an internal device according to your project management.
4-1 Import Projects 4-2 Set NA Clock NA and controllers are managed in the same project 4-3 Add Devices NA and controllers are managed in separate projects 4-3-1 Add External Devices 4-3-2 Add Internal Devices 4-4 Transfer Projects to NA 4-5 Prepare Setting Files 4-5-1 Prepare Data Log Setting Files 4-5-2 Prepare Restored File Additional Information In the steps of 4-3 “Add Devices,” you can add a controller easily only by setting an IP address if you don't need to share variables with controllers for demonstration purposes only. Refer to 4-3-1 “Add External Devices.” 13