Related Manuals 17 Programmable Terminals NA-series Practices Guide NJ/NX/NA-series Backup and Restore IAG (V127) Manual name Man. No. Model numbers Application Description NJ-series CPU Unit Hardware User's Manual W500 NJ501-££££ NJ301-££££ NJ101-££££ Learning the ba- sic specifications of the NJ-series CPU Units, in- cluding introduc- tory information, designing, instal- lation, and main- tenance. Mainly hardware information is provided. An introduction to the en- tire NJ-series system is provided along with the following information on the CPU Unit.
• Features and system configuration • Introduction • Part names and func- tions • General specifications • Installation and wiring • Maintenance and in- spection NJ/NX-series CPU Unit Software User’s Manual W501 NX701-££££ NX102-££££ NX1P2-££££ NJ501-££££ NJ301-££££ NJ101-££££ Learning how to program and set up an NJ/NX- series CPU Unit. Mainly software information is provided. The following information is provided on a Controller built with an NJ/NX-series CPU Unit.
• CPU Unit operation • CPU Unit features • Initial settings • Programming based on IEC 61131-3 language specifications NX-series Safety Control Unit User's Manual Z930 NX-SL££££ NX-SI££££ NX-SO££££ Learning how to use NX-series Safety Control Units. Describes the hardware, setup methods, and func- tions of the NX-series Safety Control Units. Sysmac Studio Version 1 Operation Manual W504 SYSMAC -SE2£££ Learning about the operating procedures and functions of the Sysmac Studio. Describes the operating procedures of the Sysmac Studio.
NA-series Programmable Terminal User’s Manual User’s Manual V117 NA5-£W££££ Learning the specifications and settings re- quired to install an NA-series Programmable Terminals and connect periph- eral devices. Information is provided on NA-series Programmable Terminal specifications, part names, installation procedures, and proce- dures to connect an NA Unit to peripheral devices. Information is also provid- ed on maintenance after operation and trouble- shooting. NA-series Programmable Terminal Software User’s Manual V118 NA5-£W££££ Learning about NA-series PT pages and ob- ject functions. Describes the pages and object functions of the NA- series Programmable Ter- minals.