Atari · Crystal Castles · 1 pp.
Atari Crystal Castles Self-Test Backdoor Sheet — Arcade Service Manual PDF
Related manuals
Document text
Entering Self-Test Grid Display Game Options Menu Switch Test Display To enter the self-test mode, set the self-test switch on the utility panel to the ON(up) position. The game tests the custom Input/Output (I/O) integrated circuits (ICs), the random-access memory (RAM), the bit-mode circuitry, the electronicallv erasable read-onlv memory (EEROM), and the read-only memory (ROM). Figure 1 shows the resulting video display if these tests pass. The custom 1/O test is the onlv test not shown on the video display. If this test passes, you will hear sounds that range froma low frequency to a high frequency. The grid display shown in Figure 5 is used for adjusting the video display.
When properly adjusted, the The manufacturer’s recommended game options are grid should be white on a black background. The each selectable option, press the left JUMP button. To change the option, press the right JUMP button. All available options are as follows: In the switch test, the left, right, and auxiliary coin switches; the left and right JUMP switches; and the Midi Trak-Ball are tested. When each switch is activatted, the location of that switch appears on the dis‘play. In Figure 10 all switches are activated. When the left JUMP switch is pressed, the motion-object pictures change from one group to another.
When the right JUMP switch is pressed, the motion-object pictures change within that group of pictures. corners of the grid should just barely go off the cor- “ners of the display. shown in Figure 8. To move the arrow that points to COIN VALUE. The coin-value option determines the number of coins entering the left or right coin mechanisms, required to play one game. The values available are %, 1, or 2. For game demonstrations, the FREE PLAY option is also available. LEFT MECH VALUE. The available left mechanism values are 1 or 2. The chosen value multiplies the coins received in this mechanism by that value.
When set to 1, a coin dropped into the left coin mechanism of the coin door has the value of 1 coin. When set to 2, acoin dropped into this mechanism has the value of 2. Auxiliary Coin Switch RIGHT MECH VALUE. The available right mechanism values are 1, 4,5, or 6. The chosen value Figure 5 Grid Video Display Accounting Display Coin Counter Figure 1 Test Passes Video Display Self-Test Switch If the RAM fails, asequence of seven “beep” sounds will be emitted from the game speakers, followed by a pause, then the sounds will be repeated. Table 1 identifies the Volume Control failing RAM for the emitted sounds.
In this table, the To increase, turn clockwise “High’’ indicates high tones from the game speaker and the “Low” indicates low tones. Game PCB If the bit-mode circuitry fails, a sequence of “beep” sounds will be emitted as follows: High, low, high, low, low, low, low. If the EEROM fails, the video display will identify the failed IC as shown in Figure 2. The display will indicate a failed IC at either location 4A or 4B. The accounting display shown in Figure 6 is used for displaying historical information about the game. The photograph shown in Figure 6 was taken of an engineering prototype game.
Therefore, in our example, no coins are shown for the left mechanism and only two coins for the right mechanism; but 46 coin credits are shown for the auxiliary coin switch. Ordinarily, the coin information is never cleared unless the EEROM are changed or damaged. Thus, this information may be compared with the information from the mechanical coin counter(s) for determining the accuracy of the mechanical coin counters. The most important information shown on the accounting display is the average game time. This time should be between 2 and 3 minutes. The display in Figure 6 isa good example of optimum game time.
A histogram of game time is shown at the bot- [An EEROM FRILURPE AT FC YE - tom of the screen. Switch Locations The illustration above shows the location of the dualinline-package (DIP) switch on the game printedcircuit board (PCB). Toggle 1 of this switch is the only switch that is used. When set to the ON position, the left and right coin counter outputs of the game PCB are paralleled together. Therefore, any coin received from the right or left coin inputs will be counted on one counter connected to either the left or right coin-counter output. The US-built games have one coin counter. Therefore, on US-built games, toggle 1 of the switch should be set to ON.
Figure 2 Therefore, on crease or decrease with a vertical movement of the control. Also, the colors of the color bar at the bottom of the display change shades of green when the ball is rotated horizontally and shades of blue when moved vertically. crease or decrease the difficulty of the game, thus increasing or decreasing the average game time. When used with the accounting display, you may tune the game for the optimum game time of 2 minutes and 30 seconds by setting this option to EASY, MEDIUM, HARD, or HARDEST. STARTING LIVES. This option allows you to increase the number of lives per game from 3 to 5. The available options are 3, 4, and 5.
Using this option along with the accounting display will allow you to tune the game for an optimum average game time of 2 minutes and 30 seconds. EXTRA LIVES. This option allows you to award bonus lives for every 70,000 points scored. The available options are YES and NO. Using this option along with the accounting display will allow you to tune the game for the optimum average game time of 2. minutes and 30 seconds.
SWITCH JUMP COIN TEST (Oe ia eee BLTTON BUTTON TRACKEGALLE HOR VERT Pies FED Ss Se DD a ee + 1 Figure 10 Switch Test Video Display Reset Hall-of-Fame When you select this from the main menu, the en- tire hall-of-fame table is reset to initials and scores that are within the program memory. The scores in this table range from 27,000 to 30,000 points. We suggest you reset these after any changes are made to the options that may affect the average game time. EXIT. This is not an option, cut the way back to the main menu. EEROM Failure Video Display 3. In this figure, integrated circuit 1L has failed. The cor- GAME rect checksums are as follows:
checksun?01 for 1K, 02 for 1L, 03 for 1N, 04 for 1H, and 05 for 1F. Checksums ofany other value indicate a failure for that IC. COIN Ce te Figure 6 Accounting Video Display 1 | ot) ae MECH 1 ict ot] ae aes ee STARTING CHECKSEM Ld a) at od al Od CHECKSEM Lit ed CHECKSUM Ireland-built Clear Accounting Display EXTRA The clear accounting video display is shown in Figure 7. Note that the coin information is never cleared. FES OFTIONS VALUE RIGHT games, toggle 1 of the switch should be set to OFF. VALUE a 0 ae Lim spa 1!
LIVES a LIVES TORE FACTORY CrREOIT YES OPTIONS exry Figure 8 Game Options Video Display ae fel Self-Test Self-Test Main Menu If all initial self-tests pass, the main menu will he displayed as shown in Figure 4. This menu allows you to select from seven different items. As indicated at the bottom of the display, set the self-test switch to off (down) to exit from self-test. We suggest you perform a self-test when you first set up, each time you collect money, change the game options, or suspect game failure. Test EEROM Display If the EEROM test passes, the results of the test are shown in Figure 9.