Ref :UM-CT7-11-001 Issue : 01 Date : 28/04/2011 Page 16 of 35 6.2 Measure menu Selected as the second position in the list on the left of the screen; then go back to the right in order to navigate among the four operation options of the Measure menu. (Left – Down – Right) 6.2.1 Measure Measure operation is the same as on the One Click menu. Before start of a measurement , the operator is prompted for selection of CART for wavelength selection. The selected Cart becomes default for later operations. 6.2.2 Set CART Set CART operation allows selecting as default another CART without making a measurement. The list of pre defined CARTS that appears when entering Set CART .
Cart Previous Press-ENTER : to validate Next New CARTs or any modifications can be introduced only in PC mode. After a new CART has been selected, basic measurement with this CART can be immediately initiated from the same menu by entering Measure (one Up). When the measure is finished, the result is shown in Data View This document is OPO property. It may not be either used or copied without authorization. OPO sprl, Crawhez 9, 4890 Thimister Clermont, Belgium. +32 87688989 - +32 87598990