Chapter 1 Product Overview Product Overview This chapter describes features of the product. About Models of this Product Gloss Black Ink/Matte Black Ink You can select either gloss black (BK) or matte black (MK) for the type of black ink you want to use. The printer prompts you to select it when you turn on the printer for the first time. c IMPORTANT You cannot change the black ink type once you select the black ink type and let the printer charge the ink. Product Firmware and Software Versions Use the product with a combination of latest versions of the product firmware, printer driver, and utility. You can check the version of your printer firmware by using one of the following methods.
• Printing the status sheet ( "Printing Status Sheet" on page 34 ) • Checking on the operation panel ( "Operation Panel Settings" on page 232 ) To get the latest version of the printer driver and utility, see "Downloading Printer Driver, Utilities, and Manuals" on page 380 . Some Epson software is available in different versions depending on the firmware version of the printer. Check the table below and use the printer and the software in the "Available" combination. If you use them in the “Not available” combination, they may not work properly, or some functions may not be available.
17 Software Version Printer firmware version EpsonNet Config SE Ver.1.4.0 or earlier Epson Device Admin Ver.4.20.1 or earlier EpsonNet Config SE Ver.1.7.0 or later Epson Device Admin Ver.4.20.2 or later TG31N8, TG06N7 TG19N5, TG31N3 TG09N2, TG08MB TG26M5, TG10M2 Available Available Versions higher than those listed above Not available Available