Chapter3 Handling 5 Click [+] to add a new set of paper size settings. 6 Enter paper size and make the margin setting of the printer. Paper Size: Enter label (page) size.. Non-Printable Area: Enter “0” in all the left, right, top and bottom fields. c IMPORTANT The paper size set in the Mac driver may not match the paper size displayed on the operation panel of the printer. Example 1) When printing 15.0 mm (0.60 inches) width labels from Mac driver • Setting value for width (Mac driver): 15.0 mm (0.60 inches) • Setting value for width (operation panel): 14.8 mm (0.58 inches) Example 2) When printing 212.0 mm (8.35 inches) height labels from Mac driver • Setting value for height (Mac driver):
212.0 mm (8.35 inches) • Setting value for height (operation panel): 211.7 mm (8.33 inches) If setting the paper size, check the value displayed on the operation panel first. 7 Click [Untitled] and enter a name for the custom size, and then click [OK]. The new paper size is applied to the printer driver. 173