Chapter3 Handling Web Config Web Config is an application software that allows you to check or change the printer settings using a web browser on a computer. To use Web Config, you need to set up an IP address to the printer in advance. Connect the computer to the same network as the printer. It is not possible to set the administrator logon to be unnecessary. If you forget the administrator password, you can initialize it. ( "Resetting the Administrator Password" on page 299 ) How to Start Web Config Start a web browser on a computer or device that is connected via a network, and then type the printer IP address into the browser.
To change the printer settings, log in from [Administrator Login] on the upper right corner of the screen. Leave the User Name field blank. The following shows initial value for the password. If there is a password label applied to the rear of the printer, the value for "PASSWORD" is the initial value. In the example shown, the initial password is 03212791. 244