Chapter 1 Product Overview Specify the number in the range of 0 to 16 nozzles. See "Operation Panel Settings" on page 232 or "PrinterSetting (Windows)" on page 190 . • The number of nozzles is the total of four color (BK (MK), C, M, Y) nozzles. • The factory default is “2”. Setting Cleaning After Nozzle Check You can set to run an auto head cleaning when the number of detected clogged nozzles exceeds the threshold. How to Set Set using the operation panel of the printer, or using PrinterSetting. • On When the number of clogged nozzles exceeds the threshold, a message is displayed on the printer’s screen and the cleaning is run automatically.
• Off When the number of clogged nozzles exceeds the threshold, a message is displayed on the printer’s screen, but the cleaning is not run. The factory default is “On”. See "Operation Panel Settings" on page 232 or "PrinterSetting (Windows)" on page 190 . Clearing All Nozzle Check Settings You can restore the nozzle check settings to the state at the time of purchase (default value). How to Set Set using the operation panel of the printer, or using PrinterSetting. See "Operation Panel Settings" on page 232 or "PrinterSetting (Windows)" on page 190 . 28