Chapter4 Information for Application Development Information for Application Development This chapter provides printer control methods and other information necessary for developing an application. How to Control the Printer The printer control method differs depending on how to print from the printer. 333 Application specifications Printer control method Page Print using the printer driver that is installed following the setup workflow described in chapter 2. Use the printer driver. Page 85 Print using the Epson Inkjet Label Printer SDK from Windows applications you developed. Use the Epson Inkjet Label Printer SDK commands.
Page 334 Print using your application that directly controls ESC/Label commands. Use the ESC/Label commands. Page 335 Print using an existing application and printer driver that were used for a ZPL II compatible monochrome printer. Change from preprint system to on-demand print system. Change the printer settings to replace the printer. Page 338 Print using a Linux driver that has been rebuilt from the Linux driver source code to match the Linux OS of the distribution you are using. Use the rebuilt printer driver for Linux. Page 181 Print using the Linux driver source code from your application. Use the source code of the Linux driver.
Page 181 Print using the iOS SDK from iOS applications you developed. Use the iOS SDK. Page 335 Print using the Android SDK from Android applications you developed. Use the Android SDK. Page 335 Print using the Web Application SDK from Web applications you developed. Use the Web Application SDK. Page 335