Chapter 1 Product Overview Checking Network Connection and Settings By printing the network connection check report, you can check the network connection status and the network settings. On the operation panel, select the menu in the order shown below to print the report. [Menu] - [General Settings] - [Network Settings] - [Connection Check] c IMPORTANT When printing the network connection check report, load paper that is 101.6 mm (4.00 inches) wide or more and 136.2 mm (5.36 inches) long or more. Amount of Remaining Paper Required to Print a Network Connection Check Report Continuous paper / continuous label If the paper width is 101.6 mm (4.00 inches) or more:
280.6 mm (11.05 inches) We recommend using continuous paper, continuous labels, or the included roll paper. The recommended length for printing the network connection check report on die-cut labels is 136.2 mm (5.36 inches) or more. Die-cut label (included roll paper) For the included roll paper, the network connection check report can be printed with two labels. Included roll paper: paper width 108.0 mm (4.25 inches), paper length 174.8 mm (6.88 inches), gap between pages 3.0 mm (0.12 inches) When printing the network connection check report with die-cut labels, the amount of remaining paper required depends on the paper width, paper length, and gap between pages.
Since some combinations require paper lengths of up to 531 mm (20.9 inches), we recommend using continuous paper, continuous labels, or the included roll paper. 36