Appendix Paper Shape/Form/Size Roll Continuous Paper (with or without Black Mark) Paper width Black mark width Paper feed direction Cut position Black mark length Black mark Paper Black mark center position Since the black mark detector is not located at the center of the paper width, black marks on both sides can be detected no matter which edge of the paper is printed from.
361 ter of paper width Item Specifications Continuous Paper Continuous Paper (Black Mark) Paper Type Plain paper, Matte paper, Glossy paper Paper width 25.4 to 108 mm (1.00 to 4.25 inches) Black mark position - See the above figure Black mark width - 13 mm (0.51 inches) or more Black mark length - At least 4 mm (0.16 inches), With 4 mm (0.16 inches) or more of space around the mark Black mark center position - 8.5 +/- 1 mm (0.33 +/- 0.04 inches) Black mark interval - 8 to 406.4 mm (0.31 to 16.00 inches) Paper thickness 0.084 to 0.131 mm (0.003 to 0.005 inches) Roll core outer diameter 44.1 mm (1.74 inches) or more Roll paper outer diameter Up to 101.6 mm (4.00 inches) Winding direction The side to be printed must face outward Holes and cutouts Paper with holes or cutouts cannot be used