Chapter3 Handling (2) High speed batch label printing: (Print 6 labels at a time + Operation required between labels) x 17 times (1) Normal printing (2) High speed batch label printing Multiple labels are merged into one piece of data so that the total length fits inside 600 mm (23.62 inches) including margins between labels. When printing labels of 250 mm (9.84 inches) length including margins, two labels are merged into one piece of data and the total print length becomes 500 mm (19.69 inches). Backing paper Label Operations required between labels Restrictions The following describes restrictions on using [High speed batch label printing].
• Accuracy of print position in the paper feed direction may be lowered. • You cannot use functions that are designed to operate for each single label on an application. • [Settings For Paper Handling After Print] for the Peeler model do not work normally except for the [Rewind] option. • Both [Cut] and [Do not cut] options in [Settings For Paper Handling After Print] for the Auto Cutter model do not work normally. • The [Notification] and [Pause] settings do not work normally. • Compared to normal printing, it takes longer to start printing since this batch print function merges multiple labels into one data. • If a paper jam occurs, you may lose multiple labels at a time.
In addition, multiple labels will be printed when the printer recovers from the error. • Multiple labels merged into up to 600 mm (23.62 inches) length data are counted as one copy. 125 97 mm 100 mm (3.82 inches) (3.94 inches) 3 mm (0.19 inches) 600 mm (23.62 inch 97 mm (3.82 inches) 100 (3.94 mm inches) 3 mm 600 (23.6 mm 2 inch 00 .94 mm inches