Chapter1 Product Overview Gloss Black Ink/Matte Black Ink If the firmware version of the printer is other than TS05JC, TS06JC, TS26JC, TS19K2, TS25K3, or TS21K5, you can select either gloss black (BK) and matte black (MK) for the type of black ink you want to use. The printer prompts you to select it when you turn on the printer for the first time. c IMPORTANT You cannot change the black ink type once you select the black ink type and let the printer charge the ink. About the Version of the Printer Driver and Utility Depending on the firmware version of the printer, available versions of the printer driver and utility vary.
Use the combination indicated as "Available (Recommended)" in the table below. In addition, download and use the latest version of firmware. You can use the combinations indicated as "Available", however, the printer may malfunction or there may be restrictions on some functions. You can check the version of your printer firmware by using one of the following methods. • Printing the status sheet ( "Printing the Status Sheet" on page 32 ) • Checking on the operation panel ( "Operation Panel Settings" on page 229 ) To get the latest version of the printer driver and utility, see "Downloading Printer Driver, Utilities, and Manuals" on page 416 .
19 Driver/PrinterSetting Version Ver.1.0.0.0 / Ver.1.1.0.0 Versions higher than those in the left column Printer firmware version TS05JC, TS06JC, TS26JC, TS19K2, TS25K3, TS21K5 Available Not available Versions higher than those in the above row. Not available Available (Recommended)