Chapter3 Handling Nozzle check settings Allows you to change the nozzle check settings. For more details about the nozzle check, see "Nozzle Verification Technology Settings" on page 28 , and for more details about the dot substitution function, see "Dot Substitution (Supplemental Printing) Function" on page 30 . 214 Item Description Nozzle check settings Trigger to Head Maintenance Specify the maximum number of clogged nozzles that is allowed to continue printing. Additional auto nozzle check during printing Select whether to run an auto nozzle check during printing. Nozzle check interval When you have enabled [Additional auto nozzle check during printing], set an interval between checks.
Cleaning after self-check Select whether to run an auto cleaning after self-check. Operation when unrecoverable clogged nozzle detected Dot substitution Select whether to enable or disable the Dot substitution function. See "Dot Substitution (Supplemental Printing) Function" on page 30. Operation at unrecoverable clogged nozzle Select an operation when unrecoverable clogged nozzles are detected.