EPSON — Settings for Replacing from ZPL II Compatible Monochrome Printer

Chapter3 Handling Font Width Setting You can change the font width. At first, set to “100”. If you want to change the height of font or space between lines, configure it on an application. Default character encoding Setting Set the default settings for character encoding. The settings are referenced depending on the content of the print data. Character encoding used Set the character encoding to be used in printing. • Not fixed (Conform to the print data) Conforms to the print data. Depending on the content of the print data, the settings in the [Character code table] and [Default character encoding] are also referenced.

• Setting of [Default character encoding] Printing will be performed conforming to the setting of [Default character encoding]. • Setting of [Character code table] Printing will be performed conforming to the setting of [Character code table]. Font Cache Function Settings The printer accesses the font data on an SD card when replacing fonts. Enabling the font cache function may shorten printing time because font data from the SD card can be cached in the RAM drive. Enabling the font cache function uses up RAM drive space. 219