Chapter1 Product Overview Inside Gap detector Edge guide Movable edge guide Release lever Paper guide unit 23 Name Description Movable edge guide Supports paper at the paper width position while the paper is fed into the printer. Squeeze the blue lever to move the edge guide. Adjust them to match the paper width. Gap detector You can adjust the position of the gap detector. The adjustment is necessary before printing on odd-shaped labels such as circle or oval. ("Adjusting Gap Detector" on page 294) Release lever Use this lever when removing a jammed paper. By moving the lever up, the paper pressure rollers are unlocked and you can remove paper jammed inside the front cover.
Edge guide Supports paper while the paper is fed into the printer. When loading paper, load the paper along this guide. Paper guide unit Move this unit when cleaning the paper feed roller. If you pull the blue lever, the entire unit moves, and you can check the paper feed roller.