Chapter3 Handling 230 Setting menu Settings Default Lock Setting General Settings Printer Settings Media Settings Label Length CW-C6000 Series 8 to 609.6[mm]/0.31 to 152.4[mm]/ - - ✔ 24[inch] 6[inch] CW-C6500 Series 8 to 609.6[mm]/0.31 to 304.8[mm]/ - - ✔ 24[inch] 12[inch] CW-C6000 Series 8 to 609.6[mm]/0.31 to 24[inch] 152.4[mm]/ 6[inch] - - ✔ CW-C6500 Series 8 to 609.6[mm]/0.31 to 24[inch] 304.8[mm]/ 12[inch] - - ✔ Gap between Labels Black mark/gap: 3[mm]/ 2 to 6[mm]/ 0.12[inch] - - ✔ 0.08 to 0.24[inch] None 3[mm]/ 0 to 6[mm]/ 0.12[inch] - - ✔ 0 to 0.24[inch] Black mark/gap:
2 to 6[mm]/ 0.08 to 0.24[inch] 3[mm]/ 0.12[inch] - - ✔ None 0 to 6[mm]/ 0 to 0.24[inch] 3[mm]/ 0.12[inch] - - ✔ Left & Right Gap*1 CW-C6000 Series Auto cutter 0.0 to 6.0[mm]/ 2.0mm/ - - ✔ model 0.0 to 0.24[inch] 0.08[inch] Peeler model 0.0 to 2.0[mm]/ 2.0mm/ - - ✔ 0.0 to 0.08[inch]* 0.08[inch] CW-C6500 Series Auto cutter 0.0 to 6.0[mm]/ 2.0mm/ - - ✔ model 0.0 to 0.24[inch] 0.08[inch] Peeler model 0.0 to 2.0[mm]/ 2.0mm/ - - ✔ 0.0 to 0.08[inch]* 0.08[inch] CW-C6000 Series Auto cutter 0.0 to 6.0[mm]/ 2.0mm/ - - ✔ model 0.0 to 0.24[inch] 0.08[inch] Peeler model 0.0 to 2.0[mm]/ 2.0mm/ - - ✔ 0.0 to 0.08[inch]* 0.08[inch] CW-C6500 Series Auto cutter 0.0 to 6.0[mm]/ 2.0mm/ - - ✔ model 0.0 to 0.24[inch] 0.08[inch] Peeler model 0.0 to 2.0[mm]/ 2.0mm/ - - ✔ 0.0 to 0.08[inch]* 0.08[inch] Auto cutter model 0.0 to 6.0[mm]/ 0.0 to 0.24[inch] 2.0mm/ 0.08[inch] - - ✔ Peeler model 0.0 to 2.0[mm]/ 0.0 to 0.08[inch]* 2.0mm/ 0.08[inch] - - ✔ Print Position Adjustment Top Position -10.9 to +10.9[mm] / 0[mm]/0[inch] * Adjust the print start -0.43 to +0.43[inch] - - ✔ position on the media Left Position -2.0 to +2.0[mm] / 0[mm]/0[inch] * Adjust the print start -0.08 to +0.08[inch] - - ✔ position on the media Paper Top Position -1.5 to +1.5[mm] / 0[mm]/0[inch] - - ✔ Adjustment -0.06 to +0.06[inch] Left Margin * Adjust image position in the printable area This is a command-direct function.
If using the printer driver, set this to "0". CW-C6000 Series -108.0 to +108.0[mm] / 0[mm]/0[inch] - - ✔ -4.25 to +4.25[inch] CW-C6500 Series -211.9 to +211.9[mm] / 0[mm]/0[inch] - - ✔ -8.34 to +8.34[inch] Top Position * Adjust the print start position on the media -10.9 to +10.9[mm] / -0.43 to +0.43[inch] 0[mm]/0[inch] - - ✔ Left Position * Adjust the print start position on the media -2.0 to +2.0[mm] / -0.08 to +0.08[inch] 0[mm]/0[inch] - - ✔ Paper Top Position Adjustment -1.5 to +1.5[mm] / -0.06 to +0.06[inch] 0[mm]/0[inch] - - ✔ Left Margin * Adjust image position in the printable area This is a command-direct function. If using the printer driver, set this to "0".
CW-C6000 Series -108.0 to +108.0[mm] / 0[mm]/0[inch] - - ✔ -4.25 to +4.25[inch] CW-C6500 Series -211.9 to +211.9[mm] / 0[mm]/0[inch] - - ✔ -8.34 to +8.34[inch] CW-C6000 Series -108.0 to +108.0[mm] / -4.25 to +4.25[inch] 0[mm]/0[inch] - - ✔ CW-C6500 Series -211.9 to +211.9[mm] / -8.34 to +8.34[inch] 0[mm]/0[inch] - - ✔ Auto cutter model 0.0 to 6.0[mm]/ 0.0 to 0.24[inch] 2.0mm/ 0.08[inch] - - ✔ Peeler model 0.0 to 2.0[mm]/ 0.0 to 0.08[inch]* 2.0mm/ 0.08[inch] - - ✔