EPSON — Operation Panel Settings

Chapter3 Handling 239 Setting menu Settings Default Lock Setting General Settings Printer Settings Media Settings Feed signal Ignore signal Ignore signal - ✔ - Execute at Low - ✔ - Ignore signal Ignore signal - ✔ - Execute at Low - ✔ - Start print signal Ignore signal Ignore signal - ✔ - Execute at Low - ✔ - Execute during Low - ✔ - Ignore signal Ignore signal - ✔ - Execute at Low - ✔ - Execute during Low - ✔ - Re-print signal Ignore signal Ignore signal - ✔ - Execute at Low - ✔ - Ignore signal Ignore signal - ✔ - Execute at Low - ✔ - Actions when Replacing Media Feed (peeler model only) Auto cut - ✔ - model: Feed Feed with Cut (auto cut without Cut ✔ model only) Peeler model:

Feed without Cut (auto Feed ✔ cut model only) Not Feed - ✔ - Calibration - ✔ - Short Calibration - ✔ - Check Media Size - ✔ - Feed (peeler model only) Auto cut model: Feed without Cut Peeler model:

Feed - ✔ - Feed with Cut (auto cut model only) ✔ Feed without Cut (auto cut model only) ✔ Not Feed - ✔ - Calibration - ✔ - Short Calibration - ✔ - Check Media Size - ✔ - Actions on Power On Feed (peeler model only) Not Feed - ✔ - Feed with Cut (auto cut model only) Feed without Cut (auto cut model only) Not Feed - ✔ - Calibration - ✔ - Short Calibration - ✔ - Check Media Size - ✔ - Feed (peeler model only) Not Feed - ✔ - Feed with Cut (auto cut model only) Feed without Cut (auto cut model only) Not Feed - ✔ - Calibration - ✔ - Short Calibration - ✔ - Check Media Size - ✔ - Network Settings Network Status Network Status