Chapter3 Handling Resetting the Administrator Password If you forgot the password, reset the password following the procedure below. The setting value when the administrator password was reset depends on whether there is a password label on the rear of the printer. • If there is a password label The value for "PASSWORD" on the password label is set. In the example shown, the password set is 03212791. • If there is no password label It is not set. 1 Press the (home) button to return to the home screen. 2 Hold down the (back) button and the Cancel button at the same time. 3 When a confirmation message is displayed, select [Yes].
4 Enter the password to unlock, and then select [OK] on the screen. The password to unlock depends on whether there is a password label applied to the rear of the printer. • If there is a password label Enter the value for "PASSWORD" on the password label. In the example shown, the initial password is 03212791. • If there is no password label Enter “1234”. Even if there is a password label on the rear of the printer, it might not be possible to initialize the printer depending on the firmware version. In that case, enter “1234”. 5 When a message is displayed, press the OK button. 298