EPSON — Cleaning the Paper Pressure Roller

Chapter3 Handling Cleaning the Paper Pressure Roller In order to prevent problems such as paper jams or shifts in the print results, if any paper dust or adhesive has adhered to the paper feed roller, clean it following the procedure below. • Do not use benzine, thinner, trichloroethylene, or ketone based solvent. Doing so may deform or damage the plastic and rubber parts. • Do not spray or allow alcohol to drip directly on the printer. If alcohol gets inside the printer, it may short-circuit the electronic components or cause deterioration or damage to the components. • Do not allow alcohol to come into contact with any sections besides the paper pressure rollers.

• If you use alcohol to clean the printer, be sure to use printer paper to prevent alcohol from getting on the paper feed roller. If alcohol gets on the paper feed roller, the print quality might decline. • After cleaning, wipe with a dry cloth so that no alcohol remains on the surface. • Do not connect the power plug or operate the power supply until the alcohol has completely dried. CAUTION 1 Turn off the printer, and unplug the power cable. 2 Open the paper cover. If paper has been loaded, remove it. ( "How to Remove Paper (For the Auto Cutter Model)" on page 66 , "How to Remove Paper (For the Peeler Model)" on page 68 ) 3 Remove the spindle. 308