EPSON — For the Auto Cutter Model

Chapter3 Handling 11 Raise the paper guide unit, and then remove any jammed paper from the inside. 12 Close the paper guide unit. 13 Lower the release lever. 14 Close the paper cover. 15 Close the front cover. 16 Press the [Pause] button. The paper jam error will be cleared. To resume printing, load the paper again. ( "How to Load Paper (Auto Cutter Model - Supply from Inside)" on page 51 , "How to Load Paper (Auto Cutter Model - Supply from Outside)" on page 55 ) After removing jammed paper, make sure that there is no labels or adhesive left inside the printer. If you use the printer without removing them, it leads to frequent paper jams, or may cause poor print quality.

If paper jam occurs frequently, clean the inside of the printer. ( "Cleaning the Printer" on page 299 ) 332