Chapter4 Information for Application Development Information for Application Development This chapter provides printer control methods and other information necessary for developing an application. How to Control the Printer The printer control method differs depending on how to print from the printer. 336 Application specifications Printer control method Page Print using the printer driver that is installed following the setup workflow described in chapter 2. Use the printer driver. Page 75 Print using your application developed with reference to Epson Inkjet Label Printer SDK. Use the Epson Inkjet Label Printer SDK commands.
Page 337 Print using your application that directly controls ESC/Label commands. Use the ESC/Label commands. Page 338 Print using an existing application and printer driver that were used for a ZPL II compatible monochrome printer. Change from preprint system to on-demand print system. Change the printer settings to replace the printer. Page 341