EPSON — CW-C6500 Series (8-inch auto cutter model)

Appendix CW-C6500 Series (8-inch auto cutter model) Roll Die-cut Label (Black Mark) Black mark width Black mark interval Cut position Side edge baseline Center of black mark detector Waste part Backing paper Label area 379 Backing paper width Paper fe length Label labels between Side ed Gap Center of black mark detector Label length Side ed Gap between labels Center of black mark detector length mark Black e Form Roll paper Backing paper width 25.4 to 215.9 mm (1 to 8.5 inches) Label width 21.4 to 211.9 mm (0.84 to 8.34 inches) Label length When auto cut is not used: 8 to 609.6 mm (0.31 to 24 inches) (up to 24 inches) When auto cut is used:

15 to 609.6 mm (0.59 to 24 inches) (up to 24 inches) Gap between Labels When auto cut is not used: 2 to 6 mm (0.08 to 0.24 inches) When auto cut is used: 2.5 to 6 mm (0.1 to 0.24 inches) Waste part on the left and right 2 ± 0.5 mm (0.08 ± 0.02 inches) Label corner R 1.5 mm (0.06 inches) or less Paper thickness Plain Paper/Matte Paper/Synthetic/Texture Paper/Glossy Paper/Glossy Film/ High Glossy Paper 0.12 to 0.24 mm (0.005 to 0.009 inches) Roll paper core inner diameter 76.2 ± 0.5 mm (3 ± 0.02 inches) Roll paper outer diameter 152.4 mm (6 inches) or less Winding direction Print side must be facing outside (facing inside is unusable)