Appendix Roll paper Continuous label (without black marks) Side edge baseline Waste part Backing paper Label area • Labels and backing paper with holes or cutouts cannot be used. 388 Backing paper width Paper f Side Form Roll paper Backing paper width 25.4 to 215.9 mm (1 to 8.5 inches) Label width With waste part: 25.4 to 215.9 mm (1 to 8.5 inches) Without waste part: 21.4 to 211.9 mm (0.84 to 8.34 inches) Label length - Gap between Labels - Waste part on the left and right With waste part: - Without waste part:
2 ± 0.5 mm (0.08 ± 0.02 inches) Label corner R - Paper thickness Plain Paper/Matte Paper/Synthetic/Texture Paper/Glossy Paper/Glossy Film/ High Glossy Paper 0.12 to 0.24 mm (0.005 to 0.009 inches) Roll paper core inner diameter 76.2 ± 0.5 mm (3 ± 0.02 inches) Roll paper outer diameter 152.4 mm (6 inches) or less Winding direction Print side must be facing outside (facing inside is unusable)