EPSON — Paper Feed Speed

Appendix Requirements for External Devices If you use an external paper feeder and/or paper rewinder with the printer, read this section carefully to know required settings and requirements for using the external devices, and perform adequate verification before starting actual printing. Media Source Setting When using an external paper feeder, change the media source setting to the setting for feeding paper from outside the printer. Setting using the Printer Driver Change the setting to [External feed] referring to "Media Source and Media Detection Settings" on page 85 .

Setting using the Operation Panel [Menu] - [Media Setting] - [Media Source] - [Rear Feed] Paper Feed Speed The table below shows paper feed speeds of this product. • “Other” means a paper feed operation when the printer is not printing, such as when feeding paper with the Feed button. • The max paper feed speed changes automatically according to the set print quality and the length to feed. 411 Print quality Max paper feed speed Max Speed 508 mm/s (20 inches/s) Speed 508 mm/s (20 inches/s) Normal 254 mm/s (10 inches/s) Quality 127 mm/s (5 inches/s) Max Quality 25.4 mm/s (1 inch/s) Other 254 mm/s (10 inches/s)