Chapter2 Setup 4 Load the roll paper on the spindle and fix it with the flange. • To move the flange, squeeze the two levers. • When loading the roll paper on the spindle, take note of the winding direction. The correct winding direction is marked on the spindle. • Fix the flange and roll paper so that there is no gap in between. 5 Hold the spindle with both hands, and set it in the printer. Install the spindle so that both ends of the spindle fit into the holders inside the printer. 6 Slide the movable edge guide to the right side. Squeeze the blue lever to move the edge guide. 60