Chapter2 Setup 8 Place your hand on the paper to flatten it, and slide the movable edge guide against the paper. 9 Insert the paper into the paper feed slot until paper feeding starts automatically. Do not load backing paper that has no labels on it. The paper may not be detected and not be fed automatically. If you are using special paper, the paper may not be fed into printer automatically because the printer can fail to detect the paper. To feed the paper into the printer manually, see "Feeding Paper into the Printer Manually" on page 72 . 62 CAUTION If the movable edge guide is not properly slided against the paper, print position may become incorrect or a paper jam may occur.
Make sure to follow the guidelines below. • There should be no gap between the • Do not slide the guide against the paper guide and the paper edge. too tightly. • Do not slide the guide against the paper too tightly.