Chapter 3 Commands 3 22 No. Command name category Command function Command and parameters 11 External I/O input signal settings Pause signal mode setting ^S(CNI,P,c c= 0/1 0: Ignore pause signal. 1: Switch the pause state if Low is asserted for the pause signal for 30 msec or longer. 12 Head cleaning signal mode setting ^S(CNI,C,c c= 0/1 0: Ignore cleaning signal. 1: Clean if Low is asserted for the cleaning signal for 30 msec or longer. 13 Clogged nozzle check signal mode setting ^S(CNI,D,c c= 0/1 0: Ignore clogged nozzle check signal. 1: Check for clogged nozzle if Low is asserted for the clogged nozzle check sig- nal for 30 msec or longer. 14 Feed signal mode setting ^S(CNI,F,c c= 0/3 0:
Ignore feed label signal. 3: Continue feeding the label as long as Low is asserted. 15 Mode setting for start print signal ^S(CNI,S,c c= 0/1/3 0: Ignore start print signal. (Normal print mode in which the printer receives and prints data, without using the start print signal input to the external I/O.) 1: Issue a label if Low is asserted for the start print signal for 30 msec or longer. 3: Continue issuing labels as long as Low is asserted for the start print signal. 16 Mode setting for re-print signal ^S(CNI,R,c c= 0/1 0: Ignore reprint label signal. 1: Reprint the previously printed label if Low is asserted for the reprint label signal for 30 msec or longer.