Chapter3 Handling • Rotation Settings: Select an option to rotate a barcode. • Hexadecimal Input Mode: Select the check box to enter data for a barcode in hexadecimal. • Module: Specify the width of the narrowest element of the barcode in units of dot. • Bar Height: Specify the height of the element in units of dot. Actual print size equivalent to the specified dots will be displayed. • HRI Character Position: Specify the position to print HRI characters. Select [Do Not Print] if printing HRI characters is not necessary. Depending on the selected barcode type, the position option cannot be selected. • Composite Component: Select a composite type. • Element Ratio:
Specify the ratio of wide element width to the narrowest element width. The recommended ratio is 2.5. • Check Digit: A number or symbol added to the barcode number in order to detect an error in the barcode number and to prevent fabrication. • Auto Convert to Minimize Entire Symbol Width: You can select this when the barcode type is CODE128. This function minimizes the number of symbols and characters that are necessary to express the specified data string. • Start Character: Specify the start character. • Stop Character: Specify the stop character. • Margin Settings: The background of the barcode is transparent.
If you select the checkbox for “Margin Settings”, the barcode is printed with the transparent background filled in white. The amount of margin can be set for [Top Margin], [Left Margin], [Bottom Margin], and [Right Margin] respectively. 2 Click [Add]. The configured barcode font is registered and added to the font list. • Up to 30 barcode fonts can be registered. • To edit settings of a registered barcode font, select the font from the font list, change the settings and then click [Save]. • To delete a registered barcode font, select the font from the font list, and then click [Delete]. 109