Chapter3 Handling Error Notification Settings Follow the procedure below to change the error notification settings of EPSON Status Monitor 3. 1 Turn the printer on. 2 Open the printer driver window. 3 Select the [Driver Utilities] tab and then click [Monitoring Preferences]. If you have not enabled EPSON Status Monitor 3, [Monitoring Preferences] is not displayed. Enable EPSON Status Monitor 3 referring to "Enabling/Disabling EPSON Status Monitor 3" on page 133 . 4 The Monitor Preferences window appears. Select the check boxes for the items that you want to be notified, and then click [OK]. • Error: When paper/ink replacement is required (Default:
Screen Notification [On]) • Communication Error: When the printer power is off (Default: Screen Notification [Off]) • Ink Low: When the ink amount is low (Default: Screen Notification [Off]) • Service Required: When a printer error occurs (Default: Screen Notification [On]) • Nozzle Clogged Warning: When the nozzles get clogged (Default: Screen Notification [On]) 136