Chapter3 Handling 7 Change the other settings to make them suitable for your label paper. The following introduces setting menus that are unique to the printer. • To change the paper source setting of the printer, change it using Epson Label Printer Utility. ( "Epson Label Printer Utility" on page 175 ) • You can change the default [Media Coating Type] setting of the printer driver following the procedure below. 1. From the Apple menu, select [System Preferences] - [Printers & Scanners]. 2. Select the printer, and then click [Options & Supplies] - [Option]. 3. Change the setting.
• If setting menus described here are not displayed in the list, the dedicated printer driver for this printer has not been added. Add the dedicated printer driver following the procedure in the link below. ( "Selecting the Dedicated Printer Driver" on page 172 ) Select the type of paper you use. 168 1 Print Settings Item Description Default Width Allows you to set the paper width. 108.0 mm {4.25 in.} Length Allows you to set the paper length. 152.4 mm {6.00 in.} Media Coating Type Allows you to select paper type. Matte paper Print Speed Allows you to select print speed. 300 mm/s {11.8 in/s} Head Maintenance Allows you to set print head flushing operation. Pause for Maintenance