Chapter3 Handling You can set the ink profile, black ratio, shrinkage correction, banding reduction, and edge correction. If you print without selecting the check boxes for these items, the printer will print according to the settings configured on the printer. The gray out settings shown on the driver screen are not showing the actual settings, but they are default settings of the printer driver. CAUTION • If you increase the ratio of black ink, be careful not to touch the label surface immediately after printing because ink can adhere to your fingers. • If the paper type is high glossy paper or glossy film, the [Banding Reduction] function may not be able to reduce color banding so much.
Please examine print quality with the paper well before using it. 8 Check the print settings, and then click [Print] to start printing. 171 4 Extension Settings 2 Item Description Default Ink Profile Allows you to adjust the ink density. It can be set in the range of −3 to 10. 0 Ratio of Black to Composite Allows you to adjust the ratio of black ink to composite black. It can be set in the range of −6 to 0. 0 Shrink correction in the paper length direction If the print result shrinks in the paper length direction, set the correction value. It can be set in the range of 0 to 12. 0 Banding Reduction Allows you adjust the ink density to reduce color banding on printouts.
It can be set in the range of −3 to 7. 0 Edge Adjustment If a slight gap occurs between the background color and the text, enabling [Edge Adjustment] may make the gap less noticeable. Off