Chapter3 Handling Nozzle check settings For more details about the nozzle check, see "Auto Nozzle Check System" on page 30 , and for more details about the dot substitution function, see "Complementary Printing (Dot substitution) Function" on page 33 . Allows you to change the nozzle check settings. 209 Item Description General Detection Settings Threshold of Clogged Nozzles Specify the allowable number of clogged nozzles to be used for the self nozzle check system. Perform Head Cleaning when Clogged Nozzle Detected Set whether or not to run print head cleaning automatically when some clogged nozzles are detected.
Detection Settings during Printing Nozzle Clog Detection Select whether to run a nozzle check during printing. Detection Interval When [Perform for each specified number of sheets] is selected for [Nozzle Clog Detection], set the number of sheets (how many sheets must be printed before performing a nozzle check). Perform Nozzle Verification when Detected Set whether to use the complementary printing function when nozzle clogging is detected. See "Complementary Printing (Dot substitution) Function" on page 33. Print Action when Detected Set whether to continue or stop printing when the number of clogged nozzles set in [Threshold of Clogged Nozzles] is exceeded.
Default settings Allows you to restore the nozzle check settings to the state at the time of purchase (default settings).