Chapter 1 Product Overview Home Screen You can check the printer status on the printer screen. Select a target part of the screen using the buttons and OK button on the operation panel. 1 2 6 7 3 4 5 27 No. Name Description 9 (pause) button • When this button is pressed during printing: Printing is stopped after printing of the current page is finished, and the (pause) LED comes on. If the button is pressed again, printing resumes and the (pause) LED goes off. • When this button is pressed while the printer is in the standby state: The printer pauses and the (pause) LED comes on. If the button is pressed again, the printer returns to the standby state and the (pause) LED goes off.
• When this button is pressed while printing is paused due to an error: The printer is released from pause mode and the (pause) LED goes off. 10 (feed) button When the (feed) button is pressed, the paper is fed by the following length. The length varies depending on the form of paper. • Paper with black marks, Paper with gaps 1 page • Others 25.4 mm {1 in.} If the (feed) button is held down after the above length of paper is fed, the paper is fed continuously as long as the button is held down. 11 Screen Status of the printer, menus, and error messages are displayed. No. Name Description 1 Message area D isplays printer status and error messages.
2 Media source/Remaining P amount of roll paper D [ W o aper source (roll or fanfold) is indicated. epending on which paper, roll or fanfold, is used, the paper icon changes. When Media Source] is set to [External Feed], “EX” appears below the paper icon. hen [Media Source] is set to [Internal Roll], you can check the remaining amount f roll paper.